 |
|
|
|
SLP20XP
18 Ga. 1 5/8" Brad Nailer |  |  |
| |
|
PRODUCT INFORMATION
| | FEATURES | SPECS | MANUAL | PARTS GUIDE |  | | Item #: | 430101N | | Firing Mode: | Sequential Actuation Trigger | | Reg. Operating Pressure: | 70-120 psi (4.8-8.3 bar) | | Air Consumption (60 cycles per min.): | (60 cycles per min.): 1.92 scfm | | Air Inlet: | 1/4" NPT | | Tool Weight: | 2.3 lbs (1kg) | | Height: | 8.25" (210mm) | | Length: | 9.5" (241mm) | | Width: | 2" (50mm) | | Fastener Capacity: | 110 | | Download Entire Spec Sheet |
|
| |
|
| | | | APPLICATIONS | |
|  | | Beading, Cabinets, Chair Rail, Decorative Trim, Furniture, Molding, Paneling, Picture Frames, Rattan, Scribe Molding, Upholstery |
|  |
| | COMPATIBLE FASTENERS | |
| Choosing the right fastener is key to a good finish and quality job.- Type: AX, AY
- Gauge: 18
- Range: 5/8" - 1 5/8"
- Collation: Straight
See All Fasteners |
| |
|
|
| PRO TIPS | |
| Nylon Washer Installation
I have a Senco M2 stapler. I had an air leak issue, so I’m installing some new o-rings and seals. One of the seals is the LB5005 made from some kind of nylon/plastic material. How do you install the LB5005 into its groove? And, what direction should the big flat edge of the LB5005 face when installed properly?
Read More...
|
|
|
|
|
|
|